Actuation Systems				Safety Systems
Induction Loop(s)	Radar Detector	Photocell	Radio Control	Touch Senitive Bottom Bar	Photocell

Manually operated 'Hand Chain' roller shutter doors.
Ideally suited to individual applications, the curtain of the door is manually raised via a continuous haul chain which drives the fully sprung counter balanced roller barrel assembly. The roller barrel assembly is suspended by mild steel end plates that are either independently fixed from side guides or with full length 'flag-post' angles to which the side guides are also secured. The spring assisted roller barrel is driven by a hand chain wheel mounted either directly at one end of the tube, or via a series of reduction gears, dependant upon the size of the door

Click on images to enlarge

Electrically operated 'Industrial' roller shutter doors.
Ideally suited for industrial applications that require frequent usage. All door components are identical to that of the manually operated 'hand chain' roller shutter door, except for the door being raised automatically by a 3 phase 414 volt electric motor in lieu of the hand chain wheel drive mechanism. The standard actuation method is via an up, down and stop button station. A manual override continuous haul chain is provided for use in the event of a power failure. A single phase 240 volt option is available where site conditions dictate.

All electrically operated roller shutter doors can be fitted with any one of a combination of activation devices or safety features.

Important note:- When automating a roller shutter door, it is also recommended that one of the safety features is also included to help prevent the door automatically closing on any obstruction / personnel.